The toilet is one of the most essential fixtures in any home. However, knowing when your toilet is beyond repair and needs to be replaced can be challenging. Begin by stuffing a couple of rags into the hole in your floor that will be exposed when you remove the toilet (it’ll be pretty stinky). Next, remove the old wax ring from the flange with a putty knife. What time to replace a toilet quick guideline

1. Leaks

Leaks are one of the most common reasons for toilet replacement. Cracks may cause this, other damage to the tank and bowl, or a sign that the toilet isn’t performing well. While it is possible to repair these leaks, replacing the toilet and avoiding a costly mess is often easier.

The most common leak is around the base of the toilet. A cracked or worn wax ring, loose bolts, or a loose flange can cause this. Remove the toilet from its pedestal and dry any surfaces underneath it to check for this type of leak. Then, use a putty knife to scrape away any old wax from around the drain opening. You should replace the wax seal ring if the area is still leaking.

Cracks in the tank or bowl are more challenging to fix. While you can try to repair them with a plumber’s putty, this isn’t a permanent solution and will likely lead to more severe problems.

2. Wobbling/What time to replace a toilet quick guideline

The bathroom is a crucial place for us to relax and relieve ourselves of the stresses of daily life. But if your toilet starts to wobble, shift, or rock, it’s annoying – it could damage the floor underneath and cause serious plumbing issues for which you’ll need a plumber.

In some cases, the toilet itself may be the culprit and can be fixed by reseating it. But in other cases, the issue is that the floor underneath the toilet has settled a bit and caused a gap or looseness.

Start by finding the water supply valve and turning it off. Then, drain and flush the toilet to remove water in the tank. Once the tank is empty, re-attach it to the toilet and hook up the water supply line. Replace the closet bolt caps if necessary, then use your adjustable wrench to give each bolt a 14-turn alternatingly until snug and tight.

3. Poor Performance

Like most things in your home, toilets wear out with age and don’t work as efficiently as they used to. Occasional clogs happen (usually because someone uses too much toilet paper or drops something down there that shouldn’t be). But if you find yourself plunging more often than usual or your toilet won’t flush at all, it’s time to consider replacing it with one that will likely perform better and save water in the long run.

If you’re worried about water bills, consider replacing your toilet with a low-flow option that uses half as much water per flush. It’s a slight difference that can add up over time.

4. Poor Appearance/What time to replace a toilet quick guideline

If you’re tired of looking at your toilet or want to upgrade to a more modern design, it may be time to replace it. It’s not hard to find newer models that look better and save you water.

Hairline cracks are another sign it’s time to upgrade. Over time, these cracks can grow and compromise the structure of your toilet. Investing in a new one before it becomes a bigger problem is best.

A good plumber can make most toilet problems disappear, but getting a new one may be worth it if it is expensive to fix the same issue repeatedly. Consider discussing the situation with a plumber who can help you weigh the repair costs and benefits of replacing an old toilet. Contact us to schedule your plumbing services today! See you here>> https://emergencyplumbery.com/contact/